The following list is a small sample of parts currently in stock at the Register’s spares store, more parts will be listed in due course. Please email the Spares Consultant, Bob Langston, to enquire about any spares required. Please note that large or heavy items may need to be collected from the stores, as they may not be able to be couriered.
The Wolseley Register Spares are sold in good faith, however, please note that all parts are sold as seen, untested and with no warranty.
The items are displayed in approximate ascending model age/model size order. Please click on image to see full size picture.
Nine, Wasp, Hornet 14hp (to 1934), Series III Ten, & early Mk1 1500 Clutch Cover:
Used. In very good condition.
Nine, Wasp, Hornet 14hp (to 1934), Series III Ten, & early Mk1 1500 Clutch Plate (7.25" dia):
NOS & Used available.
Series II 14/56 Gearbox:
Used. Unknown condition. Partially dismantled, with lid, speedo unit and bell housing all separated
Eight Clutch:
NOS. Includes clutch housing, driving plate & release bearing.
Used clutch parts also available.
Eight gearbox:
Used. Complete but unknown condition.
Eight Propshaft:
Used. Looks OK.
Series III Ten Spigot clutch bearing:
Used. 13/16" long, 13/16" outside diameter, 5/8" internal diameter. Looks OK.
Series III Ten Clutch Pedal adjusting link:
Used. Thread might be stripped.
Series III Ten Propshaft:
Used. Looks OK.
Series III Ten Bell Housing:
Used. Good condition.
Series III Ten Gearbox:
Used. Less bell housing. Unknown condition.
Series III Ten Gearstick:
Used. Looks OK.
Series III 12/48 Clutch Pressure Plate:
Used.
Surface rust only.
Series III 12/48 gearboxes:
Used. Several available.
First box complete with gear stick & knob, clutch pedal mechanism, all gears selectable, appears to be in good condition.
Others, some missing all of the above, unknown conditions.
Series III Gearbox:
Used. All gears selectable. The actual gearbox is common to the 12/48, 14/60, 16/65, 18/85, but the bell housings and the speedo driver gears differ between the models.
Also: Dismantled Gearbox. Main internal components seem to all be present and in good condition. The box lid and gearstick are missing. Some layshaft bearings are included, but not a whole set.
Series III Clutch Pressure & Drive Plates:
Used. Unknown condition. 9" diameter, to fit 16/65, 18/85.
Series III Prop shafts:
Used.
Series III 21/60 & 25hp Clutch:
Used. Looks OK. Clutch cover and drive plate. 10" diameter and 10 splines.
Series III 25 Bell housing:
Used. Has been modified to fit a DHC. Will need alloy weld to reverse
4/44, 6/80 Gearbox Cross Shaft felt seals
NEW! Ext. dia. 24mm, int.dia. 14mm. Thickness 5mm.
6/80 Gearbox:
Used. Unknown condition.
4/44 Gearbox:
Used. Unknown condition. Several available.
4/44 gearbox cross member, with tie rod:
Used. Looks OK.
4/44 Gearchange linkages:
Used. Mixed selection
4/44 Clutch housing & plate:
Used. Serviceable.
4/44 Propshaft:
Used. One UJ seized
15/50 Gearbox:
Used. Looks OK. Early 10 splined input shaft.
Also available, a complete gearbox internals in good condition, no casing.
15/50 gearbox cross member, with tie rod:
Used. Looks OK.
6/90 Series II & III Bell crank for R/H gear change:
NOS. Relay, selector lever - Part No. ACC 8297
6/90 - part of Centre Rear Gearbox Mounting:
NOS. Possibly part no. ACC5396
1500 Propshaft:
Used
1500 Prop Shaft sliding joint:
Used.
1500 Gearbox:
Used. Unknown condition. Several available, but cross member has now been sold separately.
1500 Clutch Lever:
NOS. 11G3193
1500 Clutch Anti Rattle spring:
Used - good condition. 1 required per car.
1500 clutch pressure plate:
Used. Not perfect but serviceable
1500 Clutch Master Cylinder:
Used. Requires refurbishment.
1500, 15/60, 16/60, 6/99 and 6/110 gearbox mountings:
NOS.
1500 6-99 6/110 Clutch Master Cylinder kit:
NOS. Lockheed.
Part no. KL71534. To fit:
1500 Mk1,2,3
6/99
6/110 Mk1,2
16/60 Propshaft:
Used. Complete with both yokes and UJ's. Looks OK.
16/60 Gearbox:
Used. 23 splined input shaft. Unknown condition.
6/110 Borg & Beck Drive Plate:
NOS. 9". To fit engine 7822 and 7943 onwards
6/99 10" Clutch Drive Plate:
Used.
6/99 10" Clutch Pressure Plate:
Used. Light surface rust.
6/110 Mk1 Clutch pressure plate:
NOS. Part No. 75698/11.
Diameter 9.5". Has surface rust on face, but this should clean off.
6/99 6/110 Manual Gearbox:
Used. Unknown condition.
6/99 6/110 Auto Gearbox:
Used. Unknown condition.
6/99, 6/110 Universal Joint:
NOS. Unipart GUJ102
Hornet L/H Drive Shaft:
NOS. BMC 21A 262, (replaced by 21A 1761). For manual cars.
Hornet Outer drive shaft "Bell & Joint":
NOS. Boxed with part number 17H 8600. Fits both sides on all Hornets.
Hornet Mk3, 1100 & 1300 Mk2 Clutch Slave Cylinder:
NOS. BMC part no. 22A 233. Good condition.
1100 1300 3rd Speed Gear:
NOS. Part number 22A 981.
Dated 01/11/1967.
1100 1300 Clutch Release Bearing:
Used. Looks OK. Part number
B.T. 2/150, No. 24A.
1100 1300 SPD. Fork:
NOS. Part number
B.T. 2/150, No. 24A.
18/85 Landcrab CV Joints:
Used. Dirty, but believed OK.
18/85 Diff end cap gasket:
NOS. BL 22H 883
'18/85 Mk2 'S' Drive Plate:
NOS. Borg & Beck. Unipart no. GCP183
18/85 Clutch Slave Cylinder Kit:
NOS. BL part no. 8G 8885
Six Clutch Plate:
NOS. No box, but excellent condition.
Six & Wedge Clutch Cover Assembly:
NOS. Boxed.Motaquip VCC171. To fit Six (72-75) & 22 Series (75)
