The following list is a small sample of parts currently in stock at the Register's spares store, more parts will be listed in due course. Please email the Spares Consultant, Bob Langston, to enquire about any spares required. Please note that large or heavy items may need to be collected from the stores, as they may not be able to be couriered.
The Wolseley Register Spares are sold in good faith, however, please note that all parts are sold as seen, untested and with no warranty.
The items are displayed in approximate ascending model age / model size order. Please click on image to see full size picture.
King Pin Sets:
All NOS. It is recommended that exact dimensions of your pins, bushes, & whether thrust bearings are required be supplied to ensure correct set supplied.
Series II 10/40, 12/48:- Pair of NOS , plus pins only (no bushes or cotters).
Series II 14/56, 16/60, 18/80 kingpin bushes:- Bronze, Solid type, (Note - top & bottom bush per pin are different lengths and diameters).
Series II 14/56, 16/60, 18/80:- includes kingpins, solid bushes, thrust bearings, cotters pins. (Also 1 partial set - includes kingpins, solid bushes).
Series III 8 & 10:- Various sets available.
Series III 12/48, 14/60, 16/65, 18/85:- many sets available, complete and partial. Also with both stepped & parallel pins.
14/56 front beam axle:
Used. One king pin hole worn.
14/56 front n/s hub:
Used. With steering arms and 12" back plate.
Pair 14/56 Front Hubs:
Used. Complete with bearings and seals. Look OK.
Series II 14/56 Track Rod:
Used. OK.
14/56 Track Rod Ends:
NOS & lightly used.
Eight front bump stops:
Used. Rubber perished
Eight front axle:
Used. Includes hubs. Looks OK.
Eight track rod:
Used. Complete with track rod ends (unknown condition).
Series III Eight Drag Link End:
NOS.
Eight / Ten Front Hub Housing:
Used. 2 including both bearings. Look OK.
1 just the housing.
Series III 8 & 10 Track rod ends:
NOS. Good condition.
Series III Ten front axle beam:
Used. Good condition.
Series III Ten Front stub axles:
Used. 1 pair, plus one odd one.
Series III Ten Track Rod & Ends:
Used. Unknown condition.
Series III Ten Drag Link:
Used. Complete & looks good.
Series III Front Bump Stops:
Used. Good condition. Fits all Series III models, including Supersix.
Series III 12/48 & 14/60 Front Stub Axles:
Used.
Series III 12/48 & 14/60 Front hubs:
Used. I hub missing its outer bearing.
Series III 12, 14, 16, 18 track rod ends:
NOS. Good condition.
Series III Drag Link Tube:
Used. Believed to fit pre war 14/60. No ball joints.
Series III Front axle beam:
Used. Good condition.
Fits 12/48, 14/60, 16/65, 18/85.
14/60 16/65 18/85 Track Rod:
Used. Rusty but straight. Complete with locking nuts.
Series III 16/65 & 18/85 Front Axle Assembly:
Used. Complete with hubs, backplates, bearing houses, track rod and ends. Kingpins, trackrod ends and hub bearings all look OK. Axle is same as 12/48 & 14/60 apart from the hubs and backplates.
6/80 Trunnion Cups:
New. Rubber.
4/44 15/50 pair front hub, stub axle, swivel pin assemblies & brake drums:
Used. No shoes. Unknown condition.
4/44 15/50 front stub axles:
Used. Unknown condition
4/44 15/50 front tie bar:
Used. Surface rust, but looks OK
1500 Front Swivel Hub:
Used. Good condition, but some surface rust.
1500 Tie Bar:
Used - but complete with rubbers.
Hub Bearing:
NOS. Unipart GHB125. To fit Inner Front 15/60, 16/60, 6/99,6/110.
6/99 6/110 front axle assembly:
Used. Subframe cut in half to enable lifting. However, each side assembly complete.
6/99 6/110 Track Rod Ends:
NOS, in box. (For cars from 1959 - 64). Right hand.
Also another unboxed NOS, believed left hand.
1100, 1300 Track Rod Ends:
NOS. Boxed, code QR804. One castellated nut replaced with standard nut
FWD 18/85 pair CV Joints:
Used. Believed good condition.
