12/48 mklll radiator fitting | PUBLIC ENQUIRIES | Forum


Please consider registering

sp_LogInOut Log In sp_Registration Register

Register | Lost password?
Advanced Search

— Forum Scope —

— Match —

— Forum Options —

Minimum search word length is 3 characters - maximum search word length is 84 characters

12/48 mklll radiator fitting
September 15, 2018
6:18 am

Can anyone please tell me the gap or mount thickness between the top of the front chassis rail and the bottom of the radiator, also what fittings/washers/mounts were fitted on the two lower radiator mounting studs under the chassis rail. It seems some sort of packing may have been used. Many thanks Keith

September 15, 2018
1:22 pm
Graham Button
Forum Posts: 386
Member Since:
January 3, 2013
sp_UserOfflineSmall Offline

Hi Keith,
There are two plain circular rubber mountings which going from memory i think are about 3/8″ thick and1″ to 1 1/4″ diameter that go either side of the bracket on the chassis and plus one washer about 7/8″ diameter for fitting underneath the bottom rubber mount
Fit two of the rubber mounts to the bottom of the radiator and place it onto the chassis then fit a rubber mount and a washer underneath to each of the studs followed by a nut and locknut to complete. check the bonnet fit and adjust the height of the radiator with spacers if needed.

Forum Timezone: Europe/London

Most Users Ever Online: 213

Currently Online:
1 Guest(s)

Currently Browsing this Page:
1 Guest(s)

Top Posters:

Member Stats:

Guest Posters: 155

Members: 755

Moderators: 3

Admins: 5

Forum Stats:

Groups: 2

Forums: 2

Topics: 501

Posts: 2101

Newest Members:

Kevin Parfitt

Moderators: Jan Langston: 0, Admin 2: 0, Admin 1: 2

Administrators: rob: 0, Treasurer: 0, Webmaster: 395, Jenny Ryder: 4, Editor: 0